Compare, distinguish and explain what is the difference between Conventional Milling and Climb Milling. Comparison and Differences.

Difference between Conventional Milling and Climb Milling

1. Work piece fed in the opposite direction that of the cutter. Work piece fed in the same direction that of the cutter.

2. Chips are progressively thicker. Chips are progressively thinner.

3. Strong clamping is required since the cutting force is directed upwards & tends to lift the work piece. Strong clamping is not required since the cutting force is directed downwards & keep the work piece pressed to the table.

4. Gives poor surface finish, since chips gets accumulated at the cutting zone. Gives good surface finish, since the chips are thrown away during cutting.

5. Used for hard materials. Used for soft materials and finishing operations.

Common Queries:

Write down the Comparison between Conventional Milling and Climb Milling Difference

State the difference between Climb Milling and Conventional Milling in tabular form

What are the differences between Conventional Milling and Climb Milling

Conventional Milling vs Climb Milling

About Author: Jeniffer Fleming